Only bond together in your software networking configuration what you’ve physically connected to the same switch. Firstly, what confuses me is that four entrances are shown, and the system shows eth0 – eth3 four ports , even though the NIC only has two ports in the specs. Changed in linux Ubuntu: Intel Corporation Gigabit Network Connection rev 01 When i try to manually assign an IP address to “dead” interface it brings up

Uploader: Yojin
Date Added: 18 November 2009
File Size: 48.98 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 79857
Price: Free* [*Free Regsitration Required]

I took over a Debian 7 server with an Intel NIC where the ports are bonded together for load balancing. Sign up using Facebook. The driver utilizes the ethtool interface for driver configuration and diagnostics, as well as displaying statistical information.

Joseph Salisbury jsalisbury wrote on Figure out what’s going on with the gogabit two ports you don’t currently see.

The Linux Kernel 4. All hardware requirements listed apply to use with Linux.

To post a comment you must log in. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to ‘Confirmed’. Post corporagion a guest Name. Other bug subscribers Subscribe someone else.


Unfortunately after mainline kernel installation my system doesn’t boot at all. Intel Corporation Gigabit Network Connection rev 01 Firstly, what confuses me is that four entrances are shown, and the system shows eth0 – eth3 four portseven though the NIC only has two ports in the specs.

Downloads for Intel® 82546GB Gigabit Ethernet Controller

This driver supports Intel based virtual function devices-based virtual function devices that can only be activated on kernels that support SR-IOV. Sign up using Email and Password. What additional information should i provide? At the network switch side links are in up state!

Instructions on updating ethtool can be found in the section Additional Configurations later in this document. Installed on 19 days ago InstallationMedia: If an issue is identified with netwirk released source code on a supported kernel with a supported adapter, email the specific information related to the issue to edevel lists.

No upgrade log present probably fresh install UserGroups:. By clicking “Post Your Answer”, you acknowledge that you have read our updated terms of serviceprivacy policy and cookie policyand that your lntel use of the website is subject to these policies. Brad Figg brad-figg wrote on Driver information can be obtained using ethtool, lspci, and ifconfig.


Linux* Base Virtual Function Driver for Intel(R) 1G Ethernet — The Linux Kernel documentation

This bug is missing log files that will aid in diagnosing the problem. Thanks for your help! This is the hardware:. How come – is the bonding not configured for maximum performance? If the mainline kernel does not fix this bug, please add the tag: However, only eth2 and eth3 are in fact up and running, hence two ports:.

Copyright c Intel Corporation. You need to log in to change this bug’s status.

After reboot all links are down again. Sign up or log in Sign up using Google.

From a terminal window please run: I would expect more than that, since each port can do 1 Gbps! If you’re only aware of two ports and have only cabled two ports then you should: