Defines the right click delay value in milliseconds. Check the Calibrate Elo Touchscreen monitors. Select Install driver for this computer. If you are using multiple monitors the calibration program will run on each individual monitor. If the cursor appears at the position touched, click the green arrow to accept and exit out of the calibration program.

Uploader: Mashura
Date Added: 23 December 2004
File Size: 64.16 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 22082
Price: Free* [*Free Regsitration Required]

Elo TouchSystems: Acoustic Pulse Recognition (APR)

Three target calibration points are used. Some touch-screens come with both options and either one can be used, but not both.

Follow the instructions as indicated to calibrate all contrlller and supported touchscreen s. The allowable range is 10, to and the default is 32, Review and accept the License Agreement by clicking “Yes”.

Silent Install is a mode in which no user interaction is required hence controlper is called unattended. Multiple monitors, Serial and USB controllers Run the self-extracting zip file ap unzip the installation files and initiate the EloSetup installer.

The COM port you selected will be shown in the window of this screen. Beep monitor speaker on touch. Once calibrated, the touchscreen will be ready to use automatically each time the system is restarted.

If checked, the current values are set to all touchscreens when “Apply” or “Ok” button is clicked. After the initialization process is complete, test the touchscreen. Log failure message to file. A Properties tab will be created for each touch screen controller cntroller by EloSetup and for each serial port reserved for a controller, even if that controller is not present.


Click Elo icon at the bottom of the computer screen. The drivers allow operation of the touch-screen over either USB or serial port.

EloTouch Solution | Support | Driver Download

Interested in Solutions from Elo? If a driver is required to be removed from the computer follow the following steps. The Identify Monitor button will display the Elo logo on the monitor associated with this Properties page for about one second each time this button is pressed. Qpr the Apply button for any changes to be applied.

A number will be assigned to each Properties page that is related to the order in which controllers or ports are detected or enumerated. The size eol the controllre square displayed in the Double click area tab is the actual size of double-click area accepted by Windows.

Follow the same procedure for all 3 targets as they appear. Click Next to proceed with the installation. Enabling the Right click on hold check box will enable the feature for the current touch screen. Touch here to test beep sound area. Only 3-point calibration data can be stored in the touch monitor. The Identify Monitor button will display the Elo logo on the monitor associated with this Properties page for about one second each time this button is touched.


The video controlled program may be launched seven different ways:.

If one of the monitors is not a touch monitor, Press the Esc key on the keyboard and the calibration program will advance to the next monitor, or wait until the program times out as indicated by completion of the progress bar.

Go to your computer’s Control Panel.

Elo TouchSystems: Acoustic Pulse Recognition (APR)

This controllerr applies to IR Serial only. The message will repeat again if problem is not corrected. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer xontroller, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions. Each Properties page also contains an Advanced section to further configure each touch screen on a screen-by-screen basis.

Continue to touch the screen until notified.