AVERY DENNISON ALX 925 DRIVER

Pull out the release button [12B]. Draw ribbon upwards and guide it around the ribbon roller [17A], the ribbon deflection roller [17B] and the strain relief [17C]. A [2] Assuming backing paper has gathered on the rewinder: Unsuitable ribbons can lead to poor printing results. A C [15] Inserting the ribbon roll onto the ribbon unwinding mandrel C.

Uploader: Telmaran
Date Added: 17 June 2014
File Size: 8.95 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 94927
Price: Free* [*Free Regsitration Required]

Swivel guide rod to the unwinder axle as illustrated [3] and shift it close to the material roll. The surface of the label material determines which thermal transfer ribbons produces the best adhesion.

Put the ribbon roll on the lower right ribbon mandrel [15C]. To do this loosen the thumb screw [5A] at the front material guide, shift the material guide [5B] crossways to the feed direction and tighten thumb screw again.

Printer Drivers European | Avery Dennison

Attach the ribbon end to the empty take-up roll. Guide the ribbon end under the ribbon deflection [15B] and thread through to the side of the printhead [15A].

Position the contact rollers while pressing down the opener [7]. This is an important aspect of thermal printing.

  ASTRASLIM F1 DRIVER DOWNLOAD

Alz the two thumb screws [10B] at the spring-suspended blocks.

Printer Drivers European

To achieve a Gold competency level, Solvusoft goes through extensive independent analysis that looks for, amongst other qualities, a high level of software expertise, a successful customer service track record, and top-tier customer value. Threading the backing paper underneath the printing module.

Value on dial, set by rotating the red wheel. There are three possible settings for pressure [23]: Armor APR Avery part no.

Turn the rewinder manually anti-clockwise until the backing paper is tightened [14]. Nevertheless, adjustment can be necessary if very narrow or very wide ribbons are being used. Position the spring-suspended blocks [10A] in a way that the contact rolls press symmetrically on the backing paper.

Caps [19B] protect the nuts against being adjusted by accident. He is a lifelong computer geek and loves everything related to computers, software, and new technology. Subscription auto-renews at the end of the term Learn qlx.

Remove the rewound backing paper. Set the material guide to the width of the label material.

Avery Dennison ALX Drivers Download – Update Avery Dennison Software

A B [24] Long dispensing edge option feed roller disassembled for better viewing. Undo the screws [24B] on both of the side mounting plates. Turn thumb screw [3A] loose and swivel guide rod [3B] aside. This is achieved by correctly setting the torque for the rewinding mandrel and the braking torque for the unwinding mandrel.

  ANYCOM BLUETOOTH DONGLE DRIVER

Avery Dennison ALX 924 Setup Manual User Manual

Removing rewound backing paper. Distance of the punch from the inner edge of the material [21A].

Furthermore, installing the wrong Avery Avert drivers can make these problems even worse. B [5] Adjusting the material guide B. Pull the empty ribbon core off the unwinding mandrel and put it dennnison the rewinding mandrel. Turn the dispensing edge [24A] to the desired position.

To ensure in those cases, that the label start is correctly identified, a punch offset can be preset. A [2] Assuming backing paper has gathered on the rewinder: Direct thermal Direct thermal printing is done without ribbon.